Bottle leak test machine is full automatic,can save 60% labor cost.Simple and easy to operate, in line with CE standard.It can test 0-30L plastic bottle,milk bottle, engine oil bottle,toliet cleaner bottle,pet water bottle,laundry detergent bottles,beverage bottle and so on.

In the case of the application of automatic blow molding machine, there will be such a problem or that kind of problem, believe that many people have encountered the problem of high water temperature, so how to do the automatic blow molding machine water temperature is too high?Different situations

Blow molding machine working principle: similar to blowing bubbles, the preferred resin to join the extruder, make it melt, through the ring hole into a closed end of the thin-walled round billet, and then through the compressed air, so that the blowing to the required thickness and width.Therefore,

1.Before starting the machine, check the power supply of the blow molding machine and the cooling system of the control system carefully to see whether it is normal, add lubricating oil according to the requirements, press (rotary) button is in the correct position, and start according to the requir

1.A plasticizing system 2. Maintenance of special hydraulic system for wall thickness control 3. hydraulic system 4. Regular injection of extreme pressure lubrication oil

Hollow plastic molding machineThe mold head is the heart and brain of the multilayer co-extruding hollow plastic molding machine.The performance of the die should be able to achieve: control each layer to achieve a better condition and complete circular and lateral material distribution, can not be