The quality of the punching needle and the service life of the punching needle in the automatic blow molding machine have a great relationship with the uniformity of the gap between the cold punches.In order to ensure the correct position and uniform gap between the convex and horizontal and the con

The temperature controller of large blow molding machine is a part of the energy storage heating system of die head. Today, we mainly look at the maintenance of temperature controller of large blow molding machine.In recent years, some changes have taken place in the heating system of large blow mol

The temperature controller of large blow molding machine is a part of the energy storage heating system of die head. Today, we mainly look at the maintenance of temperature controller of large blow molding machine.In recent years, some changes have taken place in the heating system of large blow molding...

The production process of the blow molding machine is composed of a variety of different processing techniques. Among the many processing techniques, the main energy consumption parts are the power part and the heating part.Energy saving of power part of blow molding machineIt is recommended that....

Good hollow blow molding products need high-quality extrusion blow molding machines to produce, so the requirements for each part of the machine are very high. When installing the reciprocating cylinder, the following points should be done:1. Before installing the cylinder of the hollow blow molding

One: the cause1. Improper adjustment of the throttle valve for slow mold closing2. The position of the slow-speed mold closing actuator is improper, the actuator does not touch the proximity switch, or the proximity switch at the slow mold closing speed and the end point of mold closing is broken.