HUAN Blog
Home » About Us » HUAN News » Blog » What are the methods to control the uniform gap of the automatic blow molding machine when assembling the punching needle?

What are the methods to control the uniform gap of the automatic blow molding machine when assembling the punching needle?

Views: 1     Author: Site Editor     Publish Time: 18-07-2022      Origin: Site

facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
kakao sharing button
snapchat sharing button
sharethis sharing button

The quality of the punching needle and the service life of the punching needle in the automatic blow molding machine have a great relationship with the uniformity of the gap between the cold punches.


In order to ensure the correct position and uniform gap between the convex and horizontal and the concave die, when assembling the punching needle, generally according to the drawing requirements, first determine the position of one of the (punch or concave die). Then take this piece as the benchmark. Align the gap and determine the exact position of the other piece.


Automatic blow molding machine


When assembling the punch, what are the main methods to control the uniform gap between the punch and the die?


(1) Light transmission method Install the upper and lower molds, irradiate them with a lamp or a flashlight, and observe the light transmission in the blanking hole of the lower mold to determine the size and uniformity of the gap. When the gap is found to be uneven, the side of the punch fixing plate can be hit with a hammer to make the convex


The mold moves in the direction of the larger gap, and observes repeatedly until it is uniform. And use screws and pins to fasten and position it.


(2) In the gasket method, the thickness is uniform around the edge of the female die, and the thickness is equal to the copper sheet or paper sheet of the unilateral gap between the convex and concave molds. Insert the punch into the corresponding hole of the concave mold, and observe the tightness of the punch and the gasket. degree. And lightly tap the fixing plate with a hammer to make the convex chess and the gasket have the same degree of tightness. After the adjustment is appropriate, tighten the upper die.



This method is suitable for punching dies with large gaps, as well as for controlling the gap between convex and concave dies of drawing dies, bending dies and forming chess pieces.


Contact us