10 years co extrusion blow molding machine manufacture,Multi layer co-extrusion blow molding equipment for pesticide bottles and jerry can.

How to decrease recycled plastic?Using it again,produce multilayer plastic products.

Bottle leak test machine is full automatic,can save 60% labor cost.Simple and easy to operate, in line with CE standard.It can test 0-30L plastic bottle,milk bottle, engine oil bottle,toliet cleaner bottle,pet water bottle,laundry detergent bottles,beverage bottle and so on.

In the case of the application of automatic blow molding machine, there will be such a problem or that kind of problem, believe that many people have encountered the problem of high water temperature, so how to do the automatic blow molding machine water temperature is too high?Different situations

Blow molding machine working principle: similar to blowing bubbles, the preferred resin to join the extruder, make it melt, through the ring hole into a closed end of the thin-walled round billet, and then through the compressed air, so that the blowing to the required thickness and width.Therefore,

1.Before starting the machine, check the power supply of the blow molding machine and the cooling system of the control system carefully to see whether it is normal, add lubricating oil according to the requirements, press (rotary) button is in the correct position, and start according to the requir