What should I do if the plastic extruder motor sees water? There will always be some faults during the operation of the equipment, which need to be dealt with in time. For example, the motor seepage problem may occur during the production of the blow molding machine. Proper handling can prevent the

Each heating zone of the hollow blow molding machine is equipped with independent segmented temperature control. The position and interval of the lamp tube and reflector in the heating zone can be adjusted according to the different shape and size of the preform to achieve the ideal heating effect.

What should I do if the newly produced blow molded products have color difference? This situation is very common and may be caused by the master color of the raw material and the temperature of the barrel. How to deal with the chromatic aberration problem?

What should I do if the material jams during the production of the blow molding machine? The extrusion blow molding machine encounters the chuck problem which is very headache. Generally, this situation may be because the length of the parison of the blow molding machine is relatively long and the weight is relatively large, which will cause this problem, and the output needs to be controlled to reduce.

Extrusion blow molding machine is one of the important equipment parts of plastic hollow products. It can produce a variety of plastic blow molding products. During the production process, some products need to control the wall thickness problem, so how to control the wall thickness?

Common faults of blow molding machine.The discharge of the extrusion blow molding machine is unstableThere are many reasons for the instability of the discharge of the hollow blow molding machine. It may be that the temperature when starting up is low and cannot meet the standard; the temperature of the extrusion barrel or die is unstable.