Views: 0 Author: Huan Machinery Publish Time: 2021-04-23 Origin: Huan Machinery
What should I do if the material jams during the production of the blow molding machine?
The extrusion blow molding machine encounters the chuck problem which is very headache. Generally, this situation may be because the length of the parison of the blow molding machine is relatively long and the weight is relatively large, which will cause this problem, and the output needs to be controlled to reduce.
There is another possibility that the hollow blow molding machine can't feed at the feeding position. In this case, we need to check whether there is still material in the hopper. If there is no material, we need to add material immediately.
If this is not the case, check whether the control contactor of the progress machine is energized. If the hollow blow molding machine is energized, quickly check whether the motor is energized and loaded. The reason is that there is a big reason for this situation. It seems that the parison is stuck to the progress zone. The simple method for this time is manual adjustment. . If it is detected that the control contactor of the hollow blow molding machine is energized, please check whether the electric eye of the preform is not in the same straight line with the reflector.