(1) Control of the thickness and length of the parisonWhen the parison is extruded from the die of the machine head, expansion will occur, making the diameter and wall thickness of the parison larger than the gap between the die, and the parison hanging on the die will sag due to its own weight, cau

Vacuum suction machine is the use of negative pressure principle, the material from the suction mouth into the silo, and then through the silo on/off valve control material discharge time, the whole work closed, can be controlled by intelligent computer, in line with the environmental protection pro

Plastic chemical barrels are also called plastic chemical barrels. They are blow-molded using scientific formulas. They have diverse colors and beautiful appearance. They are resistant to acid and alkali, corrosion, leakage, non-fading, and non-deformation. Ideal for long-distance transportation of

Blow-molded product deformation means that its external shape deviates from the shape of the mold cavity, or convex or concave, or longitudinal or radial, or partial shape deviation. It is one of the common defects of blow molding products, and it is also one of the most comprehensive and difficult

How to do the right test of the hollow blow molding machine? I.The barrel does not heat up and test run inspection II, the barrel heating test run inspection

In the case of the application of automatic blow molding machine, there will be such a problem or that kind of problem, believe that many people have encountered the problem of high water temperature, so how to do the automatic blow molding machine water temperature is too high?Different situations