Extrusion blow molding machine Extrusion blow molding machine is a machine that can make plastic products. First, the raw material is heated to complete plasticization, extruded through an extruder to form a tubular parison, injected into the mold, compressed air is introduced into the mold, the parison is inflated, adhered to the inner wall of the mold, and finally demolded after cooling , to obtain a variety of hollow plastic products.

1. What is the die head of the extrusion blow molding machine?The die head of the extrusion blow molding machine, also known as the die head, is an important part of the blow molding machine. As one of the main equipment for the production of plastic products, the blow molding machine consists of an

After more than 20 years of development in blow molding, industrial production has become more and more standardized, and the improvement of production efficiency also requires prevention of potential hazards and defensive measures.Safety factors to be paid attention to in the process of plastic products.

Daily maintenance of hollow extrusion blow molding machine.The hollow blow molding machine can maintain normal operation and is inseparable from daily maintenance.

Modern life has brought more efficient production. Today's large blow molding machines are equipped with automatic control systems, and large blow molding machines are equipped with automatic control systems.Automatic control system, also called programmable computer controller, is a time-sharing and multi-tasking operating system, which successfully builds a real-time multi-application program operating platform and supports multiple programming languages including sequential function diagrams, ladder diagrams, structured texts and high-level languages.

What should I do if the material jams during the production of the blow molding machine? The extrusion blow molding machine encounters the chuck problem which is very headache. Generally, this situation may be because the length of the parison of the blow molding machine is relatively long and the weight is relatively large, which will cause this problem, and the output needs to be controlled to reduce.