Blow Molding Machine Blog
Home » Blow Molding Machine Blog

blow mould

A list of these blow mould articles makes it easy for you to quickly access relevant information. We have prepared the following professional blow mould, hoping to help solve your questions and better understand the product information you care about.
  • Blow mould maintenance precautions
    2022-11-10
    Blow mold maintenance is one of the daily things to do in the process of mold use.In the use of blow molds, it is inevitable to produce some wear and tear. In the maintenance of blow molds, trained technicians are required to operate them. They are familiar with the technical standards of blow molds
  • The mold of large hollow blow molding machine
    2022-10-14
    Speaking of blow molds, we must be very familiar with them! It is very common in daily life, but we may have a strangeness to the mold of the large hollow blow molding machine.Don't panic! Take, for example, the mold of a large blow molding machine, much like a sandwich pan. We pour the raw material
  • What is plastic mould?
    2022-09-22
    Common sense of plastic moldExtrusion blow molding is a method of making hollow thermoplastic parts. Well-known blow molding objects are bottles, barrels, cans, boxes and all containers for packaging food, beverages, cosmetics, pharmaceuticals and daily necessities. Large blow-molded containers are
  • What is the reason for the large impact sound of blow molding mold clamping?
    2022-07-06
    One: the cause1. Improper adjustment of the throttle valve for slow mold closing2. The position of the slow-speed mold closing actuator is improper, the actuator does not touch the proximity switch, or the proximity switch at the slow mold closing speed and the end point of mold closing is broken.
  • What should I do if the material jams during the production of the extrusion blow molding machine?
    2021-04-23
    What should I do if the material jams during the production of the blow molding machine? The extrusion blow molding machine encounters the chuck problem which is very headache. Generally, this situation may be because the length of the parison of the blow molding machine is relatively long and the weight is relatively large, which will cause this problem, and the output needs to be controlled to reduce.