The energy saving of the extrusion blow molding machine can be divided into two parts: one is the power part and the other is the heating part.Energy saving in the power part: most of them use frequency converters. The energy saving method is to save the excess energy consumption of the motor. For e

Plastic PVC is also a kind of general plastic blow molding machinery with good function and low price, and it has many additives. It can be adjusted to the formula, and the function of the product can be changed greatly, for example, it can add less or no plastic agent to make hard plastic PVC product......

First of all, a blow molding machine is a machine used to process various plastic particles into plastic products.The plastic particles are fused and plasticized and squeezed into the die head to extrude the material embryo, and the material embryo is blown to a certain shape of the mold cavity, so

Bottle blowing machine as a plastic product production device, the liquid plastic spray out, using the wind generated by the machine equipment, the ejection of plastic blown to the mold cavity of a specific character, cooling and forming the product to be produced, this method greatly improves the......

Operating rules for debugging of hollow extrusion blow molding machine1. Firstly, check whether the mixer works normally. Firstly, turn off the power supply of the mixer, put the raw materials, master color and toner with good ratio into the mixing bucket, cover the mixing bucket, and turn on the po

Blowing machine temperature is too high consequence of the above five reasons, understand the damage caused by blowing machine temperature is the main impact on the hydraulic system and components. The hydraulic system is an important part of the extrusion blow molding machine. The operation of the