DN100 Big Mouth IBC Ball Valve for 1000L Ibc Tote Container

IBC tank valve consists of valve body, valve cover, valve seat, valve disc, spring and support screws and other parts. There are inlet and outlet pipelines on the valve body, and an adjusting nut on the valve cover. The pressure of the spring can be adjusted as needed to ensure the normal working condition of the valve disc.Mainly divided into two categories: butterfly valves and ball valves.

There are two kinds of IBC tank valves: ball valves and butterfly valves. For some users who use IBC tanks for secondary use, the valve needs to be replaced frequently.

IBC tank butterfly valve

The IBC butterfly valve is injection molded and assembled from engineering plastics such as HDPE. It is acid-resistant, alkali-resistant, corrosion-resistant, has high mechanical strength and is easy to open. It is widely used in chemical processes and acid and liquid storage tanks, Tank and container outlet control valves.

IBC butterfly valve opening and closing part is a disc-shaped butterfly plate, rotating around its own axis in the valve body, so as to achieve the opening and closing or adjusting valve called butterfly valve. Butterfly valve fully open to fully closed is usually less than 900, the butterfly valve and the butterfly rod itself does not have a self-locking force, in order to the positioning of the butterfly plate, to install a worm gear reducer on the valve stem. The use of worm gear reducer can not only make the butterfly plate self-locking ability, so that the butterfly plate stops in any position, but also improve the operating performance of the valve.

IBC tank ball valve

The ball valve is a valve that uses a ball with a circular channel as the opening and closing part, and the ball rotates with the valve stem to achieve the opening and closing action. The opening and closing part of the ball valve is a ball with a hole, which rotates around an axis perpendicular to the channel to achieve the purpose of opening and closing the channel.

IBC valve gasket type

IBC valve gasket materials are generally EPDM,NBR.FMP,PEP.EPDM is more common, acid and alkali resistant but not oil resistant,nitrile rubber oil resistant. Gaskets are imported from Germany.

IBC Valve installing type

1.one piece screwing type IBC valve

one piece IBC valve must be screwed with the handle facing upwards.Strong sealing, not easy to leak.

2.two pieces screwing type IBC valve

two pieces IBC tank valve is normal. The mouth does not need to be adjusted, more convenient.

3.Welding type IBC valve

Weld type IBC valve is a Type C interface. This kind of foreign use is very much, better sealing, less cost.

IBC Valve size

How to Choose IBC Valve?

1.What is the size of IBC tank discharge port?