Reasons for the unstable operation of the blow molding machine

In the process of using the blow molding machine, you may have encountered all kinds of failure problems. Some failure problems may be caused by damage or other external reasons, and some of them may be caused by the unstable operation of the blow molding machine. , This article will popularize the reasons and solutions for the unstable operation of blow molding machines.

Reason 1: The control system of the blow molding machine is unstable

As we all know, the control system controls the operation and production of the entire blow molding machine equipment. Every step of the process and every action of the equipment needs to be commanded by the control system. Before production, we will input the corresponding process parameters into the control system to ensure that the control system can accurately command and control each step of production during the production process. If the performance of the control system is not stable enough, or the blow molding machine is not equipped with a suitable type of control system equipment, the control system will not work stably, thus affecting the stable operation of the blow molding machine.

The blow molding machine control system is a key factor affecting the stable operation of the blow molding machine. Once the blow molding machine equipment you use has the problem of unstable operation, you can start from this aspect to find the problem.

Reason 2: The production pressure of the blow molding machine is unstable

The pressure involved in the production process of the blow molding machine is defined as: the clamping force and the pressure value of the air compressor. These two pressure values, no matter which aspect is wrong, the pressure value fluctuations in the production process will affect the production process of the current process of the blow molding machine, thus affecting the next production. The reasons are generally: leakage in the oil cylinder, wear of the hydraulic pump and pressure relief of the solenoid valve. The problem is generally in these three areas, which can save you a lot of time.

You may involuntarily think that the reason for the unstable operation of the blow molding machine is from the entire equipment. In fact, it is not. You should understand that a blow molding machine equipment is composed of multiple parts and supporting facilities with different functions. There is a problem of unstable operation of the blow molding machine. The problem must be in a certain process or a certain part. We need to judge the cause of the problem according to the problem, and then implement the corresponding solution.

Above, we have sorted out two reasons for the unstable operation of blow molding machines. Of course, there are not only these two points, but also others. These two points are the two main points. Knowing where the problem lies is half the battle. You can take different measures according to different problems. At the beginning of the article, I told you: I want to share with you the reasons for the unstable operation of the blow molding machine and the solutions, the reasons are introduced, and the solutions, you can move to the connection content, which not only Corresponding solutions are given for the above two points, and other aspects that affect the stable operation of the blow molding machine are also given. Please look forward to it.