Views: 3 Author: Site Editor Publish Time: 10-07-2021 Origin: Site
Extrusion blow molding machine has a service life, and the length of the service life depends on how it is used in the daily production process.
First of all, it is necessary to explain that the length of the working life of the extrusion blow molding machine, the level of production efficiency and the quality of the product are all related to the manufacturing quality of the equipment and the selection of equipment specifications and models.
However, how to allow operators to use the equipment reasonably and how to pay attention to equipment maintenance is directly related to the extension of the service life of the blow molding machine and the normal production efficiency of the blow molding machine. Therefore, in the daily use process, we try to do the following A few points.
1. Reasonably use supporting equipment, corresponding supporting equipment on the blow molding machine production line, and the production capacity of each machine must match.
Each equipment can fully play its role, so that the equipment on the production line can work in coordination.
Oversupply or insufficient supply between the upper and lower processes, and stopping waiting are all types of unsuitable equipment and unreasonable specifications.
2. Choose suitable production equipment. The choice of blow molding machine should be based on the specifications of the product. Choose the specifications and models of the blow molding machine. Using large blow molding machines to produce smaller specifications will increase power consumption and accelerate blow molding machine wear. , Increasing the manufacturing cost of products is a wasteful production plan that does not pay attention to economic accounting.
3. Technical training for operators requires that operators not only have proficient operating skills, but also understand the structure and function of the equipment and the specifications and production capacity of the processed products; at the same time, they should also know how to maintain the equipment. For the use of new workers, they must undergo technical training so that they can memorize the equipment operating procedures; conduct practical operation training and pass the examination before they can be employed to operate independently.
There is basically no need to worry about reaching these three points during the use of the blow molding machine, and there is basically no need to worry about damaging the service life of the equipment.